Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SSOP (0.154, 3.90mm Width) |
Number of Pins |
16 |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Published |
1999 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
120Ohm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
762mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
0.635mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
MAX4551 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Power Supplies |
3/5/+-5V |
Number of Channels |
1 |
Number of Circuits |
4 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Operating Supply Current |
1μA |
Nominal Supply Current |
50nA |
Max Supply Current |
1μA |
Throw Configuration |
SPST |
Turn On Delay Time |
110 ns |
Voltage - Supply, Single/Dual (±) |
2V~12V ±2V~6V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
90 ns |
Max Dual Supply Voltage |
6V |
On-State Resistance (Max) |
120Ohm |
Min Dual Supply Voltage |
2V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
90 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
3.5pF 3pF |
On-state Resistance Match-Nom |
1Ohm |
Switch Circuit |
SPST - NC |
Switch Time (Ton, Toff) (Max) |
110ns, 90ns |
Charge Injection |
2pC |
Channel-to-Channel Matching (ΔRon) |
1 Ω |
Crosstalk |
-90dB @ 100kHz |
Switching |
BREAK-BEFORE-MAKE |
Normal Position |
NO |
Height Seated (Max) |
1.75mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
MAX4551CEE+ Overview
Packed in 16-SSOP (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. In order to provide high reliability, an advanced packaging method Tube is used. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a number of circuits 1:1. The operating temperature is extended to around 0°C~70°C TA. There are 16 terminations totally. A high-quality output is provided by the electrical component's 1 channels. It is safe to turn on and run the electronic component with a 5V voltage supply. An electrical component like this is included in the 16 series. SPST - NC switching circuits are used in these analog switch ics. The multiplexer consists of 4 circuits. Using the MAX4551 search parameter, you can discover variants of the switch. A 120Ohm internal resistance characterizes this multiplexer. For details about the functions of 16 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 6V volts for the multiplexer. Digital switch that provides Dual, Single power at a cost-effective price. It is recommended to use 2V as the lowest voltage for the electrical part. The switch device would be able to operate with 1μA current. Putting voltage greater than 1μA on the multiplexer may cause damage. If put voltage greater than 6V on the multiplexer, damage may be caused to the device. You should attach at least 2V voltage if you are using dual power supply. SEPARATE OUTPUT outputs are utilized by this digital multiplexer.
MAX4551CEE+ Features
1 Channels
Switch Circuit: SPST - NC
1μA Supply Current
MAX4551CEE+ Applications
There are a lot of Maxim Integrated MAX4551CEE+ Analog Switches & Multiplexers ICs applications.
- Digital access cross connects
- Medical Instrumentation
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- USB 1.1 signal switching circuits
- DSUs
- Microprocessor controlled systems
- Microwave transmission systems
- Relay replacements
- Voice over IP/DSL – Integrated Access Devices, Smart
- HDTV