MAX4553CEE+T

110ns, 90ns SPST - NO/NC 120Ohm Analog Switches BREAK-BEFORE-MAKE MAX4553 16 Pins 1nA 5V 16-SSOP (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4553CEE+T
Package: 16-SSOP (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 373
Description: 110ns, 90ns SPST - NO/NC 120Ohm Analog Switches BREAK-BEFORE-MAKE MAX4553 16 Pins 1nA 5V 16-SSOP (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SSOP (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	0°C~70°C TA
Packaging	Tape & Reel (TR)
Published	1999
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	120Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	762mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	0.635mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX4553
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	5V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	12V
Min Supply Voltage	2V
Operating Supply Current	1μA
Nominal Supply Current	50nA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	350 ns
Voltage - Supply, Single/Dual (±)	2V~12V ±2V~6V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	250 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	120Ohm
Min Dual Supply Voltage	2V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	90 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	3.5pF 3pF
On-state Resistance Match-Nom	1Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	110ns, 90ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-90dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	110ns
Switch-off Time-Max	90ns
Height Seated (Max)	1.75mm
Width	3.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

MAX4553CEE+T Overview

Shipping overseas is convenient with the electronic component packed in 16-SSOP (0.154, 3.90mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around 0°C~70°C TA. A total of 16 terminations have been recorded. A electrical component with 1 channels is capable of high-quality output. A 5V voltage supply should turn on and run the electronic component. As part of the design of the 16 series, this electronic part has been incorporated into the system. Based on SPST - NO/NC switching circuits, these analog multiplexers work. A total of 4 circuits make up this switch device. Use MAX4553 to search for variants of the digital switches. Internally, this switch multiplexer has a resistance of 120Ohm. For functions related to 16 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users should never supply a voltage higher than 12V to a switch device. An effective Dual, Single supply digital multiplexer. A low voltage of 2V should be applied to the electronic component. For this digital switch to work, 1μA current would suffice. It may damage the digital multiplexer if the voltage is higher than 1μA. Despite this switch's dual supply capability, its voltage should not exceed 6V. For dual power supplies, a voltage of at least 2V should be attached. This analog switch ic utilizes SEPARATE OUTPUT output. It can operate from 5V operating voltages.