Parameters |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
16-DIP (0.300, 7.62mm) |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Published |
1999 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
120Ohm |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
4 |
Supply Voltage |
5V |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
20 |
Base Part Number |
MAX4553 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
JESD-30 Code |
R-PDIP-T16 |
Qualification Status |
Not Qualified |
Power Supplies |
3/5/+-5V |
Number of Channels |
1 |
Number of Circuits |
4 |
Operating Supply Current |
1μA |
Throw Configuration |
SPST |
Voltage - Supply, Single/Dual (±) |
2V~12V ±2V~6V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-5V |
On-State Resistance (Max) |
120Ohm |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
90 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
3.5pF 3pF |
On-state Resistance Match-Nom |
1Ohm |
Switch Circuit |
SPST - NO/NC |
Switch Time (Ton, Toff) (Max) |
110ns, 90ns |
Charge Injection |
2pC |
Channel-to-Channel Matching (ΔRon) |
1 Ω |
Crosstalk |
-90dB @ 100kHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
125ns |
Switch-off Time-Max |
100ns |
Length |
19.175mm |
Width |
7.62mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
MAX4553CPE Overview
Due to its 16-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. To ensure high reliability, a new packaging method Tube is used. Through Hole is where this multiplexer is located. 1:1 is the number of circuits in the multiplexer and demultiplexer. An extended operating temperature of 0°C~70°C TA degrees Celsius. Total terminations are 16. A electrical component with 1 channels is capable of high-quality output. When the electronic component is given a voltage of 5V, it should be turned on and run. An injection of 16 pins is performed into the body of the electrical component. A SPST - NO/NC switching circuit is used for these analog switches. A total of 4 circuits make up this switch device. MAX4553 can be used to search for analog multiplexer variants. The internal resistance of this digital multiplexer is 120Ohm. This switch device is a typical Multiplexer or Switches. Analogue multiplexer with a Dual, Single supply type that is cost-effective. In order to operate this switch device, it would need a current of 1μA. The digital multiplexer has SEPARATE OUTPUT outputs that can be used.
MAX4553CPE Features
1 Channels
Switch Circuit: SPST - NO/NC
1μA Supply Current
MAX4553CPE Applications
There are a lot of Maxim Integrated MAX4553CPE Analog Switches & Multiplexers ICs applications.
- USB 1.1 signal switching circuits
- SDH/SONET multiplexers
- Switching Systems
- Remote wireless modules
- Data Acquisition Systems
- Wireless Local Loop
- Fiber In The Loop (FITL)
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Audio and video routing
- Audio/video switches