MAX4558CEE
| Parameters | |
|---|---|
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 250 ns |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 160Ohm |
| Min Dual Supply Voltage | 2V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 96 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2.5pF 10pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Time (Ton, Toff) (Max) | 150ns, 120ns |
| Charge Injection | 2.4pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -93dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 160Ohm |
| Max Power Dissipation | 640mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4558 |
| Pin Count | 16 |
| Operating Supply Voltage | 9V |
| Power Supplies | 3/3.3/5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Propagation Delay | 150 ns |
| Turn On Delay Time | 350 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Supply Type | Dual, Single |
MAX4558CEE Overview
Shipping overseas is convenient with the electronic component packed in 16-SSOP (0.154, 3.90mm Width). The advanced packaging method Tube provides high reliability. A switch device like this is mounted in Surface Mount. 8:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around 0°C~70°C TA. There are 16 terminations totally. The electronic part delivers high-quality output through its 8 channels. When a voltage supply of 5V is used, the electronic component should be turned on and run. A total of 16 pins are injected into the body of the electronic part. Circuits number 1 make up this analogue multiplexer. Using the MAX4558 search parameter, you can discover variants of the switch. It has an internal resistance of 160Ohm. To find out what the 16 pins do, please refer to the datasheets. Users shouldn't supply more than 12V voltage to the switch device. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 2V is the lowest voltage that should be fed to the electronic electronic part. For this digital switch to work, 1μA current would suffice. For this multiplexer, dual supply voltage is feasible, but it should not exceed 6V. With dual power supplies, you should attach at least 2V. Operating voltages of 9V are compatible with the electrical part.
MAX4558CEE Features
8 Channels
1μA Supply Current
MAX4558CEE Applications
There are a lot of Maxim Integrated MAX4558CEE Analog Switches & Multiplexers ICs applications.
- Precision test equipment
- Mechanical reed relay replacement
- SDH
- Low-Voltage
- Intelligent PBX
- 65 V DACs
- Public switching systems
- High-Voltage
- Battery Powered Instruments
- SDH/SONET multiplexers
