MAX4558CEE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 220Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 640mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | MAX4558 |
| Pin Count | 16 |
| Operating Supply Voltage | 9V |
| Power Supplies | 3/3.3/5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Propagation Delay | 150 ns |
| Turn On Delay Time | 350 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 250 ns |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 160Ohm |
| Min Dual Supply Voltage | 2V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 96 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2.5pF 10pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Time (Ton, Toff) (Max) | 150ns, 120ns |
| Charge Injection | 2.4pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -93dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4558CEE+T Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SSOP (0.154, 3.90mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. There is 8:1 ratio between the number of multiplexers and demultiplexers. Around 0°C~70°C TA is the extended operating temperature. The total number of terminations is 16. By its 8 channels, the electronic component provides high-quality output. With a 5V voltage supply, the electrical component should be turned on and run. The electrical component body receives 16 pins. It consists of 1 circuits. Try searching for the analog switch ic with MAX4558 if you are looking for variants. It has an internal resistance of 220Ohm. You can find the functions of the 16 pins in the datasheets. normally, users should not supply switches with voltages higher than 12V. Dual, Single supply type digital switch with a low cost. In order for the electronic part to function properly, the lowest voltage should be 2V. 1μA current would be enough for this multiplexer to operate. Despite this switch's dual supply capability, its voltage should not exceed 6V. It is recommended that you attach at least 2V to your dual power supply. This electrical part is compatible with 9V operating voltages.
MAX4558CEE+T Features
8 Channels
1μA Supply Current
MAX4558CEE+T Applications
There are a lot of Maxim Integrated MAX4558CEE+T Analog Switches & Multiplexers ICs applications.
- Medical Instrumentation
- Remote wireless modules
- Video switching
- SDH/SONET multiplexers
- Communication systems
- Audio signal routing
- CSU
- High speed data transmission line cards
- RGB switches
- Channelized and Unchannelized DS3 applications
