MAX4558CSE
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 220Ohm |
| Max Power Dissipation | 696mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4558 |
| Pin Count | 16 |
| Operating Supply Voltage | 9V |
| Power Supplies | 3/3.3/5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Throw Configuration | SP8T |
| Propagation Delay | 150 ns |
| Turn On Delay Time | 350 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 250 ns |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 160Ohm |
| Min Dual Supply Voltage | 2V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 96 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2.5pF 10pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Time (Ton, Toff) (Max) | 150ns, 120ns |
| Charge Injection | 2.4pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -93dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX4558CSE Overview
This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. The advanced packaging method Tube provides high reliability. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have the same number of circuits 8:1. Operating temperature extended to 0°C~70°C TA. Total terminations are 16. The electronic part provides high-quality output because it has 8 channels. With a 5V voltage supply, the electrical component should be turned on and run. It is injected into the electrical part body with 16 pins. 1 circuits are used in this analogue multiplexer. Search with MAX4558 if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 220Ohm. Datasheets for 16 pin functions are available upon request. In normalcircumstances, users should not exceed 12V volts for the multiplexer. A cost-effective Dual, Single supply type analogue multiplexer. It is recommended to use 2V as the lowest voltage for the electrical part. For this multiplexer to operate, 1μA current would be sufficient. Despite this switch device's dual supply capability, its voltage should not exceed 6V. A dual power supply should have at least 2V voltage attached. A voltage of 9V can be used to operate the electronic component.
MAX4558CSE Features
8 Channels
1μA Supply Current
MAX4558CSE Applications
There are a lot of Maxim Integrated MAX4558CSE Analog Switches & Multiplexers ICs applications.
- Sample-and-hold systems
- Data Acquisition Systems
- E1 Multiplexer
- Remote wireless modules
- Digital Cross-Connects
- CSU
- Intelligent PBX
- Cellular phones
- PCMCIA cards
- Audio and video signal routing
