MAX4558EEE
| Parameters | |
|---|---|
| Length | 4.98mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 288.002805mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 160Ohm |
| Max Power Dissipation | 640mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4558 |
| Pin Count | 16 |
| Operating Supply Voltage | 9V |
| Power Supplies | 3/3.3/5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Max Supply Current | 1μA |
| Throw Configuration | SP8T |
| Propagation Delay | 150 ns |
| Turn On Delay Time | 350 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 250 ns |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 160Ohm |
| Min Dual Supply Voltage | 2V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 96 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2.5pF 10pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Time (Ton, Toff) (Max) | 150ns, 120ns |
| Charge Injection | 2.4pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -93dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Height | 1.55mm |
MAX4558EEE Overview
The electrical component comes in 16-SSOP (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. Advanced packaging method Tube is used to provide high reliability. Surface Mount is where this multiplexer is located. 8:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature extended to -40°C~85°C TA. Totally, there are 16 terminations. The electronic part delivers high-quality output through its 8 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. An injection of 16 pins is performed into the body of the electrical component. This multiplexer is composed of 1 circuits. Using the MAX4558 search parameter, you can discover variants of the switch. It has an internal resistance of 160Ohm. Datasheets for 16 pin functions are available upon request. Users should never supply a voltage higher than 12V to a switch device. The digital multiplexer has a low cost Dual, Single supply. 2V should be the lowest voltage fed to the electronic component. For this digital switch to work, 1μA current would suffice. The analogue multiplexer may be damaged if voltage is greater than 1μA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 6V. It is recommended that you attach at least 2V to your dual power supply. 9V operating voltages can be used with this electrical part.
MAX4558EEE Features
8 Channels
1μA Supply Current
MAX4558EEE Applications
There are a lot of Maxim Integrated MAX4558EEE Analog Switches & Multiplexers ICs applications.
- Public switching systems
- Low-Voltage
- Relay Replacement
- Industrial
- DSUs
- High-Voltage
- Audio and video switching
- Video signal routing
- PCMCIA cards
- E1 Network Equipment
