MAX4558ESE+T
| Parameters | |
|---|---|
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 96 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2.5pF 10pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Time (Ton, Toff) (Max) | 150ns, 120ns |
| Charge Injection | 2.4pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -93dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 220Ohm |
| Max Power Dissipation | 696mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4558 |
| Pin Count | 16 |
| Operating Supply Voltage | 9V |
| Power Supplies | 3/3.3/5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Propagation Delay | 150 ns |
| Turn On Delay Time | 350 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 250 ns |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 160Ohm |
| Min Dual Supply Voltage | 2V |
| High Level Output Current | 10mA |
MAX4558ESE+T Overview
This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Surface Mount is this multiplexer. Multiplexer and demultiplexer circuits have a number 8:1. Increasing operating temperature to around -40°C~85°C TA. In total, 16 terminations have occurred. As a result of its 8 channels, this electronic component provides high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. 16 pins are injected to the electronic part body. The multiplexer consists of 1 circuits. Search with MAX4558 if you are looking for analog multiplexer variants. There is 220Ohm internal resistance in this digital multiplexer. It is generally not recommended to supply a voltage higher than 12V to the switch device in normal circumstances. Analog switch ics with Dual, Single supply type are cost-effective. It is recommended that the electrical component receives a voltage of 2V. This digital switch can be operated with a current of 1μA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 6V. For dual power supplies, a voltage of at least 2V should be attached. Operating voltages of 9V are compatible with the electrical part.
MAX4558ESE+T Features
8 Channels
1μA Supply Current
MAX4558ESE+T Applications
There are a lot of Maxim Integrated MAX4558ESE+T Analog Switches & Multiplexers ICs applications.
- DVD-R
- Cable PC
- Data Acquisition Systems
- Switching Systems
- Wireless Local Loop
- Battery-powered systems
- Audio and video signal routing
- Signal routing between systems
- Video signal routing
- Avionics
