MAX4559CPE
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4559 |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/3.3/5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Supply Current-Max (Isup) | 0.01mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 160Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 96 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2.5pF 6pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 150ns, 120ns |
| Charge Injection | 2.4pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -93dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 150ns |
| Signal Current-Max | 0.01A |
| Length | 19.175mm |
| RoHS Status | Non-RoHS Compliant |
MAX4559CPE Overview
The electronic component is convenient to ship overseas because it is packed in a 16-DIP (0.300, 7.62mm). High reliability is ensured by the advanced packaging method Tube. The multiplexer is located in Through Hole. 4:1 is the ratio of multiplexer to demultiplexer circuits. Operation at a temperature around 0°C~70°C TA. In total, there are 16 terminations. High-quality output is provided by the electronic component's 4 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. The electrical component body receives 16 pins. Multiplexers built on a SP4T switching circuit are built. This multiplexer is composed of 2 circuits. Search with MAX4559 if you are looking for analog multiplexer variants. It is a typical Multiplexer or Switches analog multiplexer. Integrated with DIFFERENTIAL MULTIPLEXER analog IC.
MAX4559CPE Features
4 Channels
Switch Circuit: SP4T
MAX4559CPE Applications
There are a lot of Maxim Integrated MAX4559CPE Analog Switches & Multiplexers ICs applications.
- MP3 players
- Medical systems
- ISDN NT1/TA
- USB 1.1 signal switching circuits
- E1 Multiplexer
- HDTV
- Sample-and-hold systems
- Multiplexers
- Residential Gateways, Home Gateway/Router
- Data switching
