MAX4559CSE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 160Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 696mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX4559 |
| Pin Count | 16 |
| Operating Supply Voltage | 9V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 1μA |
| Propagation Delay | 150 ns |
| Turn On Delay Time | 350 ns |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 250 ns |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 160Ohm |
| Min Dual Supply Voltage | 2V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 96 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2.5pF 6pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 150ns, 120ns |
| Charge Injection | 2.4pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -93dB @ 100kHz |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4559CSE+T Overview
The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. There is 4:1 ratio between the number of multiplexers and demultiplexers. An extended operating temperature of 0°C~70°C TA degrees Celsius. Total terminations are 16. As a result of its 4 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 5V voltage supply. As part of its design, the 16 series is equipped with this electronic component. Unlike digital switches, these are based on SP4T switching circuits. The multiplexer consists of 2 circuits. Try searching for MAX4559 variants of the analog switch ic. This digital multiplexer has 160Ohm internal resistance. Please refer to the datasheets for 16 pins functions. It is generally not recommended to supply a voltage higher than 12V to the switch device in normal circumstances. It is recommended to use 2V as the lowest voltage for the electrical part. 1μA current would be enough for this multiplexer to operate. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 6V. When using dual power supplies, you should attach at least 2V. Integrated with an analog IC DIFFERENTIAL MULTIPLEXER. A voltage of 9V can be used to operate the electronic component.
MAX4559CSE+T Features
4 Channels
Switch Circuit: SP4T
1μA Supply Current
MAX4559CSE+T Applications
There are a lot of Maxim Integrated MAX4559CSE+T Analog Switches & Multiplexers ICs applications.
- Industrial
- FTTH
- Imaging
- Low-Voltage
- Precision instrumentation
- Audio and video routing
- Frame Relay Equipment
- Automotive applications
- Precision test equipment
- CSU
