MAX4559EEE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 288.002805mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 160Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 640mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4559 |
| Pin Count | 16 |
| Operating Supply Voltage | 9V |
| Power Supplies | 3/3.3/5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Max Supply Current | 1μA |
| Propagation Delay | 150 ns |
| Turn On Delay Time | 350 ns |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 250 ns |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 160Ohm |
| Min Dual Supply Voltage | 2V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 96 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2.5pF 6pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 150ns, 120ns |
| Charge Injection | 2.4pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -93dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.01A |
| Height | 1.55mm |
| Length | 4.98mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4559EEE+ Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SSOP (0.154, 3.90mm Width). Advanced packaging method Tube is used to provide high reliability. Mounted in Surface Mount is this multiplexer. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. Operating temperature extended to -40°C~85°C TA. In total, there have been 16 terminations. A electrical component with 4 channels is capable of high-quality output. It is safe to turn on and run the electronic component with a 5V voltage supply. This electronic part can be found in the 16 series. On the other hand, analog switches can be constructed using SP4T switching circuits. A 2 circuit is present in this switch device. Look for analog switch ic variants by searching with MAX4559. This digital multiplexer has 160Ohm internal resistance. Datasheets for 16 pin functions are available upon request. A analogue multiplexer of this type is a Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 12V. Dual, Single supply type digital switch with a low cost. 2V is the lowest voltage that should be fed to the electronic electronic part. When the digital multiplexer is charged above 1μA, damage can occur. If put voltage greater than 6V on the multiplexer, damage may be caused to the device. For dual power supplies, a voltage of at least 2V should be attached. It is integrated with DIFFERENTIAL MULTIPLEXER analog ICs. There is a voltage range of 9V operating voltages for the electrical part.
MAX4559EEE+ Features
4 Channels
Switch Circuit: SP4T
MAX4559EEE+ Applications
There are a lot of Maxim Integrated MAX4559EEE+ Analog Switches & Multiplexers ICs applications.
- Microwave transmission systems
- Audio/video switches
- Automatic test equipment
- Audio and video routing
- Battery Powered Systems
- PDH Multiplexers
- Automotive applications
- High speed data transmission line cards
- Medical
- Data Acquisition Systems
