Parameters |
Pin Count |
16 |
JESD-30 Code |
R-PDIP-T16 |
Power Supplies |
3/3.3/5V |
Number of Channels |
4 |
Number of Circuits |
2 |
Max Supply Voltage |
12V |
Min Supply Voltage |
2V |
Operating Supply Current |
1μA |
Logic Function |
Multiplexer |
Voltage - Supply, Single/Dual (±) |
2V~12V ±2V~6V |
Supply Type |
Dual, Single |
Supply Current-Max (Isup) |
0.01mA |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Max Dual Supply Voltage |
6V |
On-State Resistance (Max) |
160Ohm |
Min Dual Supply Voltage |
2V |
Multiplexer/Demultiplexer Circuit |
4:1 |
Off-state Isolation-Nom |
96 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
2.5pF 6pF |
On-state Resistance Match-Nom |
2Ohm |
Switch Circuit |
SP4T |
Switch Time (Ton, Toff) (Max) |
150ns, 120ns |
Charge Injection |
2.4pC |
Channel-to-Channel Matching (ΔRon) |
2 Ω |
Crosstalk |
-93dB @ 100kHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
150ns |
Signal Current-Max |
0.01A |
Length |
19.175mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
16-DIP (0.300, 7.62mm) |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
1999 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
220Ohm |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Technology |
CMOS |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
20 |
Base Part Number |
MAX4559 |
MAX4559EPE Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-DIP (0.300, 7.62mm). Advanced packaging method Tube is used to provide high reliability. It is mounted in the position Through Hole. Multiplexers and demultiplexers have a ratio of 4:1. The operating temperature is extended to around -40°C~85°C TA. Total terminations are 16. Due to its 4 channels, the electrical component produces high-quality output. With a 5V voltage supply, the electrical component should be turned on and run. An electrical component of this type can be found in the 16 series. On the other hand, analog switches can be constructed using SP4T switching circuits. It consists of 2 circuits. If you are looking for variants of the digital switch, trying search with MAX4559. There is 220Ohm internal resistance in this digital multiplexer. Multiplexers should not be powered above 12V in normal situations. Analogue multiplexer with a Dual, Single supply type that is cost-effective. There should be 2V voltage fed to the electrical part below 2V. For this digital switch to work, 1μA current would suffice. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 6V. If you are using a dual power supply, you should attach at least 2V.
MAX4559EPE Features
4 Channels
Switch Circuit: SP4T
1μA Supply Current
MAX4559EPE Applications
There are a lot of Maxim Integrated MAX4559EPE Analog Switches & Multiplexers ICs applications.
- Video signal routing
- Sample hold systems
- Precision data acquisition
- High speed data transmission line cards
- CSU
- ISDN NT1/TA
- Power routing
- Mechanical reed relay replacement
- Cell phones
- SDH