MAX4559ESE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 160Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 696mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4559 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Operating Supply Voltage | 9V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 1μA |
| Propagation Delay | 150 ns |
| Turn On Delay Time | 350 ns |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 250 ns |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 160Ohm |
| Min Dual Supply Voltage | 2V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 96 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2.5pF 6pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 150ns, 120ns |
| Charge Injection | 2.4pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -93dB @ 100kHz |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4559ESE+T Overview
Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. High reliability is provided by advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. Operation at a temperature around -40°C~85°C TA. A total of 16 terminations have been recorded. A electrical component with 4 channels is capable of high-quality output. Turning on and running the electrical part should be easy with a 5V voltage supply. A key feature of the 16 series is the inclusion of this electronic part as part of its design. The analog switch ics are built using SP4T switching circuits. It consists of 2 circuits. Try searching for MAX4559 variants of the analog switch ic. Analog switches have 160Ohm internal resistance. Users shouldn't supply more than 12V voltage to the switch device. The lowest voltage the electronic part should receive is 2V. This multiplexer would work with 1μA current. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 6V. It is recommended that you attach at least 2V to your dual power supply. It is integrated with DIFFERENTIAL MULTIPLEXER analog ICs. There is a voltage range of 9V operating voltages for the electrical part.
MAX4559ESE+T Features
4 Channels
Switch Circuit: SP4T
1μA Supply Current
MAX4559ESE+T Applications
There are a lot of Maxim Integrated MAX4559ESE+T Analog Switches & Multiplexers ICs applications.
- Optical Applications
- Fiber In The Loop (FITL)
- Medical systems
- Cellular phones
- Microprocessor Controlled Analog Systems
- Industrial control systems
- Video signal routing
- High speed data transmission line cards
- DSUs
- Low-Voltage
