MAX4560CEE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX4560 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 3 |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 160Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 96 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 4pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 150ns, 120ns |
| Charge Injection | 2.4pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -93dB @ 100kHz |
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 120ns |
| Height Seated (Max) | 1.75mm |
| Length | 4.89mm |
| RoHS Status | ROHS3 Compliant |
MAX4560CEE+ Overview
This electronic part is conveniently packaged in 16-SSOP (0.154, 3.90mm Width), making it easy to ship abroad. Advanced packaging method Tube is used to provide high reliability. Surface Mount is where this multiplexer is located. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Increasing operating temperature to around 0°C~70°C TA. In total, 16 terminations have occurred. Due to its 1 channels, the electrical component produces high-quality output. A 5V voltage supply should turn on and run the electronic component. It is part of the design of the 16 series that this electronic component is included. Circuits based on SPDT switching are used to construct these analog switch ics. The circuits in this analogue multiplexer number 3. MAX4560 can be used to search for analog multiplexer variants.
MAX4560CEE+ Features
1 Channels
Switch Circuit: SPDT
MAX4560CEE+ Applications
There are a lot of Maxim Integrated MAX4560CEE+ Analog Switches & Multiplexers ICs applications.
- Access Concentrators
- Multi-Line E1 Interface Cards
- PDAs
- Avionics test equipment
- Central office
- Voice over IP/DSL – Integrated Access Devices, Smart
- Low-Voltage
- Communication systems
- Precision data acquisition
- Imaging
