MAX4560ESE

150ns, 120ns SPDT 160Ohm Analog Switches BREAK-BEFORE-MAKE MAX4560 16 Pins 1nA 5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4560ESE
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 783
Description: 150ns, 120ns SPDT 160Ohm Analog Switches BREAK-BEFORE-MAKE MAX4560 16 Pins 1nA 5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	150ns
Switch-off Time-Max	120ns
Signal Current-Max	0.01A
Height Seated (Max)	1.75mm
Length	9.9mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	Non-RoHS Compliant
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	1999
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	160Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Max Power Dissipation	696mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	3
Supply Voltage	5V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX4560
Pin Count	16
Operating Supply Voltage	6V
Number of Channels	1
Number of Circuits	3
Max Supply Voltage	12V
Min Supply Voltage	2V
Operating Supply Current	1μA
Nominal Supply Current	10μA
Max Supply Current	1μA
Turn On Delay Time	250 ns
Logic Function	Multiplexer
Voltage - Supply, Single/Dual (±)	2V~12V ±2V~6V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	350 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	160Ohm
Min Dual Supply Voltage	2V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	96 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	2pF 4pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	150ns, 120ns
Charge Injection	2.4pC
Channel-to-Channel Matching (ΔRon)	2 Ω
Crosstalk	-93dB @ 100kHz

MAX4560ESE Overview

The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. Advanced packaging method Tube is used to provide high reliability. A switch device like this is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. Around -40°C~85°C TA is the extended operating temperature. Total terminations are 16. This electronic part offers high-quality output due to its 1 channels. With a 5V voltage supply, the electrical component should be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. Multiplexers built on a SPDT switching circuit are built. The circuits in this analogue multiplexer number 3. Using the MAX4560 search parameter, you can discover variants of the switch. The internal resistance of this digital multiplexer is 160Ohm. Please refer to the datasheets for 16 pins functions. Multiplexers should not be powered above 12V in normal situations. Analog switch ics with Dual, Single supply type are cost-effective. The lowest voltage the electronic part should receive is 2V. 1μA current would be enough for this multiplexer to operate. Putting voltage greater than 1μA on the multiplexer may cause damage. For this switch, a dual supply voltage is feasible, but it must not exceed 6VIt is recommended that you attach at least 2V to your dual power supply. 6V operating voltages can be used with this electrical part.