MAX4564EUA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 60Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4564 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | +-53/5V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Voltage - Supply, Single/Dual (±) | 1.8V~12V ±1V~6V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| -3db Bandwidth | 450MHz |
| On-State Resistance (Max) | 60Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 77 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 6pF 8pF |
| On-state Resistance Match-Nom | 0.75Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 60ns, 40ns |
| Charge Injection | 3pC |
| Channel-to-Channel Matching (ΔRon) | 750m Ω |
| Crosstalk | -72dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 60ns |
| Switch-off Time-Max | 40ns |
| Normal Position | NC |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX4564EUA+ Overview
Due to its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tube. Multiplexers like this are mounted in the Surface Mount position. Multiplexer and demultiplexer circuits have a number 2:1. Operation at a temperature around -40°C~85°C TA. 8 terminations have been made so far. A electrical component with 1 channels is capable of high-quality output. A 5V voltage supply should turn on and run the electronic component. It is part of the design of the 8 series that this electronic component is included. Multiplexers built on a SPDT switching circuit are built. It consists of 1 circuits. Try searching for the analog switch ic with MAX4564 if you are looking for variants. A 60Ohm internal resistance characterizes this multiplexer. The functions of 8 pins can be found in the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches.
MAX4564EUA+ Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 450MHz
MAX4564EUA+ Applications
There are a lot of Maxim Integrated MAX4564EUA+ Analog Switches & Multiplexers ICs applications.
- Ultrasound
- Automotive applications
- Industrial
- USB 1.1 signal switching circuits
- Relay Replacement
- Microprocessor Controlled Analog Systems
- Digital Cross-Connects
- Signal routing between systems
- Wireless Local Loop
- Cable PC
