MAX4568EUK-T
| Parameters | |
|---|---|
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Resistance | 70Ohm |
| Additional Feature | CAN ALSO OPERATE WITH 3V SUPPLY |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 247mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4568 |
| Pin Count | 5 |
| Operating Supply Voltage | 9V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 50nA |
| Nominal Supply Current | 50nA |
| Max Supply Current | 1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 250 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 100 ns |
| On-State Resistance (Max) | 70Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 20pF 12pF |
| On-state Resistance Match-Nom | 0.5Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 150ns, 80ns |
| Charge Injection | 6pC |
| Channel-to-Channel Matching (ΔRon) | 500m Ω |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.8V~12V |
| Normal Position | NC |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
MAX4568EUK-T Overview
The electrical component comes in SC-74A, SOT-753 packaging, which makes it convenient to ship overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. Temperatures around -40°C~85°C TA are extended for operation. In total, there have been 5 terminations. The electronic part provides high-quality output because it has 1 channels. If the voltage supply is 3V volts, the electrical component should be turned on and run. A total of 5 pins are injected into the body of the electronic part. The analog switch ics are built using SPST - NO switching circuits. This multiplexer is composed of 1 circuits. Try searching for MAX4568 variants of the analog switch ic. This digital multiplexer has 70Ohm internal resistance. To find out what the 5 pins do, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users shouldn't supply more than 12V voltage to the switch device. An effective Single supply digital multiplexer. The lowest voltage the electronic part should receive is 1.8V. For this digital switch to work, 50nA current would suffice. Analogue multiplexers require a 1.8V~12V voltage to drain from a single voltage supply. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. Operating voltages range from 9V. Additional features include: CAN ALSO OPERATE WITH 3V SUPPLY.
MAX4568EUK-T Features
1 Channels
Switch Circuit: SPST - NO
50nA Supply Current
Additional Features: CAN ALSO OPERATE WITH 3V SUPPLY
MAX4568EUK-T Applications
There are a lot of Maxim Integrated MAX4568EUK-T Analog Switches & Multiplexers ICs applications.
- Private Branch Exchange (PBX)
- T1/E1 Terminals
- PDH Multiplexers
- Microprocessor controlled systems
- Avionics
- Cellular phones
- Industrial control systems
- Data Acquisition Systems
- High speed data transmission line cards
- Digital access cross connects
