MAX4580CPE
| Parameters | |
|---|---|
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 115pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 160ns, 210ns |
| Charge Injection | -60pC |
| Channel-to-Channel Matching (ΔRon) | 500m Ω |
| Crosstalk | -65dB @ 1MHz |
| Normal Position | NC |
| Length | 19.175mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 1.25Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 571mW |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4580 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Operating Supply Voltage | 20V |
| Power Supplies | 5/30/+-5/+-15V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 5μA |
| Max Supply Current | 500nA |
| Throw Configuration | SPST |
| Turn On Delay Time | 210 ns |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±4.5V~20V |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 160 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 1.25Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
MAX4580CPE Overview
Packed in 16-DIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. High reliability is ensured by the advanced packaging method Tube. There is an analog multiplexer mounted in position Through Hole. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Operating temperature around 0°C~70°C TA extended. 16 terminations have been made so far. A electrical component with 1 channels is capable of high-quality output. An injection of 16 pins is performed into the body of the electrical component. Multiplexers built on a SPST - NC switching circuit are built. A total of 2 circuits make up this switch device. Look for analog switch ic variants by searching with MAX4580. Internally, this switch multiplexer has a resistance of 1.25Ohm. Please refer to the datasheets for 16 pins functions. There is a standard Multiplexer or Switches analogue multiplexer here. An abnormal situation would be for the switch device to be supplied with a voltage greater than 36V. An effective Dual, Single supply digital multiplexer. There should be 4.5V voltage fed to the electrical part below 4.5V. When the digital multiplexer is charged above 500nA, damage can occur. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 20V. You should attach at least 4.5V voltage if you are using dual power supply. This analog switch ic utilizes SEPARATE OUTPUT output. It can operate from 20V operating voltages.
MAX4580CPE Features
1 Channels
Switch Circuit: SPST - NC
MAX4580CPE Applications
There are a lot of Maxim Integrated MAX4580CPE Analog Switches & Multiplexers ICs applications.
- Data Acquisition Systems
- ISDN NT1/TA
- Audio and video switching
- SONET/SDH ADM
- Residential Gateways, Home Gateway/Router
- DVD-R
- Medical systems
- Access Concentrators
- PDH Multiplexers
- Video switching
