MAX4581ASE+T
| Parameters | |
|---|---|
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 696mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX4581 |
| Pin Count | 16 |
| Operating Supply Voltage | 9V |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Propagation Delay | 200 ns |
| Turn On Delay Time | 300 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 200 ns |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 80Ohm |
| Min Dual Supply Voltage | 2V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 74 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 4pF 18pF |
| On-state Resistance Match-Nom | 1Ohm |
| Switch Time (Ton, Toff) (Max) | 200ns, 100ns |
| Charge Injection | 0.5pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -78dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.02A |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 80Ohm |
MAX4581ASE+T Overview
Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Surface Mount is where this multiplexer is located. 8:1 is the number of circuits in the multiplexer and demultiplexer. Extended operating temperature around -40°C~125°C TA. The total number of terminations is 16. A 8 channel electronic part produces high-quality output. Powered by a 5V voltage supply, the electrical part should be switched on and run. A total of 16 pins are injected into the body of the electronic part. There are 1 circuits in this multiplexer. MAX4581 can be used to search for analog multiplexer variants. As far as internal resistance is concerned, it has 80Ohm. A voltage higher than 12V should not normally be supplied to the switches. An effective Dual, Single supply digital multiplexer. 2V should be the lowest voltage fed to the electronic component. For this digital switch to work, 1μA current would suffice. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 6V. If you are using dual power supplies, you should attach at least 2V. The electronic component can function from 9V.
MAX4581ASE+T Features
8 Channels
1μA Supply Current
MAX4581ASE+T Applications
There are a lot of Maxim Integrated MAX4581ASE+T Analog Switches & Multiplexers ICs applications.
- Digital access cross connects
- Relay Replacement
- USB 1.1 signal switching circuits
- PDAs
- Transmit
- Precision data acquisition
- Medical
- High-Voltage
- E1 Network Equipment
- SONET
