Parameters |
Factory Lead Time |
1 Week |
Mounting Type |
Through Hole |
Package / Case |
16-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Published |
2012 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
MAX4581 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Power Supplies |
3/5/+-5V |
Number of Channels |
8 |
Number of Circuits |
1 |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
Voltage - Supply, Single/Dual (±) |
2V~12V ±2V~6V |
Neg Supply Voltage-Nom (Vsup) |
-5V |
On-State Resistance (Max) |
80Ohm |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
74 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
4pF 18pF |
On-state Resistance Match-Nom |
1Ohm |
Switch Time (Ton, Toff) (Max) |
200ns, 100ns |
Charge Injection |
0.5pC |
Channel-to-Channel Matching (ΔRon) |
1 Ω |
Crosstalk |
-78dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
200ns |
Signal Current-Max |
0.02A |
Height Seated (Max) |
4.572mm |
Width |
7.62mm |
RoHS Status |
ROHS3 Compliant |
MAX4581CPE+ Overview
Packed in 16-DIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. Advanced packaging method Tube is used to provide high reliability. This analog switch is mounted in Through Hole. There is 8:1 ratio between the number of multiplexers and demultiplexers. Operation at a temperature around 0°C~70°C TA. Total terminations are 16. A electrical component with 8 channels is capable of high-quality output. Powered by a 5V voltage supply, the electrical part should be switched on and run. 16 pins are injected to the electronic part body. This multiplexer is composed of 1 circuits. Look for analog switch ic variants by searching with MAX4581. It is a typical Multiplexer or Switches analog multiplexer. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board.
MAX4581CPE+ Features
8 Channels
MAX4581CPE+ Applications
There are a lot of Maxim Integrated MAX4581CPE+ Analog Switches & Multiplexers ICs applications.
- Modems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- High-Voltage
- Digital access cross connects
- Avionics test equipment
- Relay Replacement
- SONET
- MP3 players
- High speed data transmission line cards