Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2012 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
80Ohm |
Terminal Finish |
Matte Tin (Sn) |
Max Power Dissipation |
457mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
MAX4581 |
Pin Count |
16 |
Operating Supply Voltage |
9V |
Power Supplies |
3/5/+-5V |
Number of Channels |
8 |
Number of Circuits |
1 |
Max Supply Voltage |
12V |
Min Supply Voltage |
2V |
Operating Supply Current |
1μA |
Propagation Delay |
200 ns |
Turn On Delay Time |
300 ns |
Logic Function |
Multiplexer |
Voltage - Supply, Single/Dual (±) |
2V~12V ±2V~6V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
200 ns |
Max Dual Supply Voltage |
6V |
On-State Resistance (Max) |
80Ohm |
Min Dual Supply Voltage |
2V |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
73 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
4pF 18pF |
On-state Resistance Match-Nom |
1Ohm |
Switch Time (Ton, Toff) (Max) |
200ns, 100ns |
Charge Injection |
0.5pC |
Channel-to-Channel Matching (ΔRon) |
1 Ω |
Crosstalk |
-78dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Signal Current-Max |
0.02A |
Length |
5mm |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
MAX4581CUE+T Overview
Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. High reliability is achieved by using advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. 8:1 is the number of circuits in the multiplexer and demultiplexer. Extended operating temperature around 0°C~70°C TA. In total, there have been 16 terminations. A high-quality output is provided by the electrical component's 8 channels. It is safe to turn on and run the electronic component with a 5V voltage supply. An injection of 16 pins is performed into the body of the electrical component. There are 1 circuits in this switch device. Try searching for the analog switch ic with MAX4581 if you are looking for variants. It has an internal resistance of 80Ohm. For details about the functions of 16 pins, please refer to the datasheets. Users shouldn't supply more than 12V voltage to the switch device. Analogue multiplexer with a Dual, Single supply type that is cost-effective. 2V is the lowest voltage that should be fed to the electronic electronic part. The switch device would be able to operate with 1μA current. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 6V. A dual power supply should have at least 2V voltage attached. 9V operating voltages are supported by the electronic component.
MAX4581CUE+T Features
8 Channels
1μA Supply Current
MAX4581CUE+T Applications
There are a lot of Maxim Integrated MAX4581CUE+T Analog Switches & Multiplexers ICs applications.
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- New designs requiring multiplexer functions
- Multiplexers
- Microprocessor controlled systems
- Automatic test equipment
- Microwave transmission systems
- E1 Network Equipment
- Residential Gateways, Home Gateway/Router
- Cable Modem
- Battery-powered systems