Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SSOP (0.154, 3.90mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2012 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
80Ohm |
Terminal Finish |
Matte Tin (Sn) |
Max Power Dissipation |
667mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.635mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
MAX4581 |
Pin Count |
16 |
Operating Supply Voltage |
9V |
Power Supplies |
3/5/+-5V |
Number of Channels |
8 |
Number of Circuits |
1 |
Max Supply Voltage |
12V |
Min Supply Voltage |
2V |
Operating Supply Current |
1μA |
Propagation Delay |
200 ns |
Turn On Delay Time |
300 ns |
Logic Function |
Multiplexer |
Voltage - Supply, Single/Dual (±) |
2V~12V ±2V~6V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
200 ns |
Max Dual Supply Voltage |
6V |
On-State Resistance (Max) |
80Ohm |
Min Dual Supply Voltage |
2V |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
73 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
4pF 18pF |
On-state Resistance Match-Nom |
1Ohm |
Switch Time (Ton, Toff) (Max) |
200ns, 100ns |
Charge Injection |
0.5pC |
Channel-to-Channel Matching (ΔRon) |
1 Ω |
Crosstalk |
-78dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Signal Current-Max |
0.02A |
Length |
4.89mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
MAX4581EEE+T Overview
Packed in 16-SSOP (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. High reliability is ensured by the advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Operation at a temperature around -40°C~85°C TA. Total terminations are 16. The electronic part delivers high-quality output through its 8 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. The circuits in this analogue multiplexer number 1. Use MAX4581 to search for variants of the digital switches. In this multiplexer, the internal resistance is 80Ohm. The datasheets for the 16 pins explain the functions. normally, users should not supply switches with voltages higher than 12V. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended to use 2V as the lowest voltage for the electrical part. 1μA current would be enough for this multiplexer to operate. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 6V. The voltage should be at least 2V if you are using dual power supplies. 9V operating voltages can be used with this electrical part.
MAX4581EEE+T Features
8 Channels
1μA Supply Current
MAX4581EEE+T Applications
There are a lot of Maxim Integrated MAX4581EEE+T Analog Switches & Multiplexers ICs applications.
- Precision data acquisition
- Transmit
- Medical
- PDAs
- Fiber to the Home
- Access Concentrators
- Relay replacements
- Communication systems
- Routers
- Medical Instrumentation