MAX4581EGE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Resistance | 150Ohm |
| Max Power Dissipation | 1.481W |
| Base Part Number | MAX4581 |
| Number of Circuits | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Supply Type | Dual, Single |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 80Ohm |
| Min Dual Supply Voltage | 2V |
| High Level Output Current | 20mA |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 4pF 18pF |
| Switch Time (Ton, Toff) (Max) | 200ns, 100ns |
| Charge Injection | 0.5pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -78dB @ 1MHz |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4581EGE+T Overview
Due to its 16-VQFN Exposed Pad packaging, the electronic part is convenient for international shipping. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. There is 8:1 ratio between the number of multiplexers and demultiplexers. An extended operating temperature of -40°C~85°C TA degrees Celsius. 1 circuits are used in this analogue multiplexer. Try searching with MAX4581 to find analog multiplexer variants. There is 150Ohm internal resistance in this digital multiplexer. To find out what the functions of 16 pins are, please refer to their datasheets. Users shouldn't supply more than 12V voltage to the switch device. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended to use 2V as the lowest voltage for the electrical part. An operating current of 1μA would be sufficient for this switch device. If put voltage greater than 6V on the multiplexer, damage may be caused to the device. If you are using a dual power supply, you should attach at least 2V.
MAX4581EGE+T Features
1μA Supply Current
MAX4581EGE+T Applications
There are a lot of Maxim Integrated MAX4581EGE+T Analog Switches & Multiplexers ICs applications.
- Industrial
- High speed data transmission line cards
- High reliability control systems
- Power routing
- Audio and video signal routing
- Industrial control systems
- 65 V DACs
- PBX interfaces
- DSLAMs
- Fiber In The Loop (FITL)
