Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2012 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
80Ohm |
Terminal Finish |
Matte Tin (Sn) |
Max Power Dissipation |
696mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
MAX4581 |
Pin Count |
16 |
Operating Supply Voltage |
12V |
Number of Channels |
8 |
Number of Circuits |
1 |
Max Supply Voltage |
12.6V |
Min Supply Voltage |
2V |
Operating Supply Current |
1μA |
Propagation Delay |
200 ns |
Turn On Delay Time |
200 ns |
Logic Function |
Multiplexer |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
100 ns |
On-State Resistance (Max) |
80Ohm |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
73 dB |
Current - Leakage (IS(off)) (Max) |
2nA |
Channel Capacitance (CS(off), CD(off)) |
4pF 18pF |
On-state Resistance Match-Nom |
1Ohm |
Switch Time (Ton, Toff) (Max) |
200ns, 100ns |
Charge Injection |
0.5pC |
Channel-to-Channel Matching (ΔRon) |
1 Ω |
Crosstalk |
-96dB @ 1MHz |
Voltage - Supply, Single (V+) |
2V~12V |
Length |
9.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
ROHS3 Compliant |
MAX4581LESE+ Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tube is used. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have the same number of circuits 8:1. Operating temperature around -40°C~85°C TA extended. Totally, there are 16 terminations. By its 8 channels, the electronic component provides high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. It is injected into the electrical part body with 16 pins. This multiplexer is composed of 1 circuits. Search with MAX4581 if you are looking for analog multiplexer variants. Analog switches have 80Ohm internal resistance. To find out what the functions of 16 pins are, please refer to their datasheets. Multiplexers should not be powered above 12.6V in normal situations. Analogue multiplexers of the Dual, Single supply type that are cost-effective. The lowest voltage the electronic part should receive is 2V. An operating current of 1μA would be sufficient for this switch device. An analogue multiplexer drains from a single voltage supply at 2V~12V. This electrical part is compatible with 12V operating voltages.
MAX4581LESE+ Features
8 Channels
1μA Supply Current
MAX4581LESE+ Applications
There are a lot of Maxim Integrated MAX4581LESE+ Analog Switches & Multiplexers ICs applications.
- MP3 players
- Automatic test equipment
- High speed data transmission line cards
- Relay replacements
- Multi-Line E1 Interface Cards
- Industrial
- ATM
- Isolation
- Medical systems
- Communication systems