MAX4582ASE
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 80Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Power Dissipation | 696mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4582 |
| Pin Count | 16 |
| Operating Supply Voltage | 9V |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Propagation Delay | 200 ns |
| Turn On Delay Time | 300 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 0.01mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 200 ns |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 80Ohm |
| Min Dual Supply Voltage | 2V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 74 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 4pF 10pF |
| On-state Resistance Match-Nom | 1Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 200ns, 100ns |
| Charge Injection | 0.5pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -96dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 100ns |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
MAX4582ASE Overview
Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.154, 3.90mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, you'll find this switch device. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. Temperatures around -40°C~125°C TA are extended for operation. Total terminations are 16. The electronic part provides high-quality output because it has 4 channels. It is safe to turn on and run the electronic component with a 5V voltage supply. An electrical component of this type can be found in the 16 series. The analog switch ics are built using SP4T switching circuits. The circuits in this analogue multiplexer number 2. Look for analog switch ic variants by searching with MAX4582. As far as internal resistance is concerned, it has 80Ohm. Datasheets for functions of 16 pins are available. It is generally not recommended to supply a voltage higher than 12V to the switch device in normal circumstances. Dual, Single supply type digital switch with a low cost. 2V is the lowest voltage that should be fed to the electronic electronic part. For this multiplexer to operate, 1μA current would be sufficient. There is no problem with using dual supply voltage, but it should not exceed 6V. If you are using dual power supplies, you should attach at least 2V. There is a voltage range of 9V operating voltages for the electrical part.
MAX4582ASE Features
4 Channels
Switch Circuit: SP4T
1μA Supply Current
MAX4582ASE Applications
There are a lot of Maxim Integrated MAX4582ASE Analog Switches & Multiplexers ICs applications.
- New designs requiring multiplexer functions
- Digital Cross-Connects
- PDH Multiplexers
- Low-Voltage
- Central office
- Industrial and process control systems
- DSLAMs
- Medical systems
- Audio and video routing
- Data switching
