MAX4582AUE
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 80Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Power Dissipation | 457mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4582 |
| Pin Count | 16 |
| Operating Supply Voltage | 9V |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Propagation Delay | 200 ns |
| Turn On Delay Time | 300 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 0.01mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 200 ns |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 80Ohm |
| Min Dual Supply Voltage | 2V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 74 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 4pF 10pF |
| On-state Resistance Match-Nom | 1Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 200ns, 100ns |
| Charge Injection | 0.5pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -96dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 100ns |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
MAX4582AUE Overview
The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. The multiplexer is located in Surface Mount. 4:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature around -40°C~125°C TA extended. The total number of terminations is 16. A high-quality output is provided by the electrical component's 4 channels. An 5V voltage supply should allow the electrical part to be turned on and run. This electronic part can be found in the 16 series. A SP4T switching circuit is used to build these analog multiplexers. There are 2 circuits in this multiplexer. Try searching for MAX4582 variants of the analog switch ic. As far as internal resistance is concerned, it has 80Ohm. Datasheets for functions of 16 pins are available. An abnormal situation would be for the switch device to be supplied with a voltage greater than 12V. Digital switch that provides Dual, Single power at a cost-effective price. There should be 2V voltage fed to the electrical part below 2V. 1μA current would be enough for this multiplexer to operate. There is no problem with using dual supply voltage, but it should not exceed 6V. It is recommended that you attach at least 2V to your dual power supply. This electrical part is compatible with 9V operating voltages.
MAX4582AUE Features
4 Channels
Switch Circuit: SP4T
1μA Supply Current
MAX4582AUE Applications
There are a lot of Maxim Integrated MAX4582AUE Analog Switches & Multiplexers ICs applications.
- USB 1.1 signal switching circuits
- PDH Multiplexers
- Precision data acquisition
- Cell phones
- Relay Replacement
- CSU
- SONET/SDH ADM
- HDTV
- Sample-and-hold systems
- Multi-Line E1 Interface Cards
