MAX4582CPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX4582 |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Supply Current-Max (Isup) | 0.01mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 80Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 74 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 4pF 10pF |
| On-state Resistance Match-Nom | 1Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 200ns, 100ns |
| Charge Injection | 0.5pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -96dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 100ns |
| Length | 19.175mm |
| RoHS Status | ROHS3 Compliant |
MAX4582CPE+ Overview
Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. High reliability is provided by advanced packaging method Tube. Through Hole is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 4:1. Around 0°C~70°C TA is the extended operating temperature. Total terminations are 16. A electrical component with 4 channels is capable of high-quality output. Powered by a 5V voltage supply, the electrical part should be switched on and run. 16 pins are injected to the electronic part body. A SP4T switching circuit is used for these analog switches. A total of 2 circuits make up this switch device. If you are looking for variants of the digital switch, trying search with MAX4582. In this analog multiplexer, the value is Multiplexer or Switches. With a DIFFERENTIAL MULTIPLEXER analog IC integrated into the board.
MAX4582CPE+ Features
4 Channels
Switch Circuit: SP4T
MAX4582CPE+ Applications
There are a lot of Maxim Integrated MAX4582CPE+ Analog Switches & Multiplexers ICs applications.
- PBXs
- Microwave transmission systems
- Digital Cross-Connects
- Industrial
- Relay Replacement
- MP3 players
- Private Branch Exchange (PBX)
- DVD-R
- Communication systems
- Switching Systems
