Parameters |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
MAX4582 |
Pin Count |
16 |
JESD-30 Code |
R-PDSO-G16 |
Qualification Status |
Not Qualified |
Power Supplies |
3/5/+-5V |
Number of Channels |
4 |
Number of Circuits |
2 |
Analog IC - Other Type |
DIFFERENTIAL MULTIPLEXER |
Voltage - Supply, Single/Dual (±) |
2V~12V ±2V~6V |
Supply Current-Max (Isup) |
0.01mA |
Neg Supply Voltage-Nom (Vsup) |
-5V |
On-State Resistance (Max) |
80Ohm |
Multiplexer/Demultiplexer Circuit |
4:1 |
Off-state Isolation-Nom |
73 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
4pF 10pF |
On-state Resistance Match-Nom |
1Ohm |
Switch Circuit |
SP4T |
Switch Time (Ton, Toff) (Max) |
200ns, 100ns |
Charge Injection |
0.5pC |
Channel-to-Channel Matching (ΔRon) |
1 Ω |
Crosstalk |
-96dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-off Time-Max |
100ns |
Height Seated (Max) |
1.1mm |
Length |
5mm |
Width |
4.4mm |
RoHS Status |
ROHS3 Compliant |
Factory Lead Time |
1 Week |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Published |
2012 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
MAX4582CUE+ Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). The advanced packaging method Tube provides high reliability. In Surface Mount, you'll find this switch device. 4:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around 0°C~70°C TA. A total of 16 terminations have been recorded. By its 4 channels, the electronic component provides high-quality output. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. An electrical component like this is included in the 16 series. A SP4T switching circuit is used to build these analog multiplexers. There are 2 circuits in this multiplexer. Try searching with MAX4582 to find analog multiplexer variants. The analogue multiplexer in this example is a typical Multiplexer or Switches. It is integrated with DIFFERENTIAL MULTIPLEXER analog ICs.
MAX4582CUE+ Features
4 Channels
Switch Circuit: SP4T
MAX4582CUE+ Applications
There are a lot of Maxim Integrated MAX4582CUE+ Analog Switches & Multiplexers ICs applications.
- Access Concentrators
- High-Voltage
- Microwave transmission systems
- Audio/video switches
- Sample hold systems
- Mechanical reed relay replacement
- Cable Modem
- SDH/SONET multiplexers
- Fiber In The Loop (FITL)
- Precision test equipment