MAX4582CUE
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 80Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Power Dissipation | 457mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4582 |
| Pin Count | 16 |
| Operating Supply Voltage | 9V |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Propagation Delay | 200 ns |
| Turn On Delay Time | 300 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 0.01mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 200 ns |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 80Ohm |
| Min Dual Supply Voltage | 2V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 74 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 4pF 10pF |
| On-state Resistance Match-Nom | 1Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 200ns, 100ns |
| Charge Injection | 0.5pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -96dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 100ns |
| Height | 950μm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX4582CUE Overview
Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). To ensure high reliability, a new packaging method Tube is used. In Surface Mount, this analog switch is mounted. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. Operating temperature extended to 0°C~70°C TA. In total, there have been 16 terminations. A high-quality output is provided by the electrical component's 4 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. This electronic part can be found in the 16 series. SP4T switching circuits are used in these analog switch ics. A total of 2 circuits make up this switch device. Using the MAX4582 search parameter, you can discover variants of the switch. It has an internal resistance of 80Ohm. Datasheets for 16 pin functions are available upon request. normally, users should not supply switches with voltages higher than 12V. An effective Dual, Single supply digital multiplexer. The lowest voltage fed to the electronic component should be 2V. For this multiplexer to operate, 1μA current would be sufficient. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 6V. If you are using a dual power supply, you should attach at least 2V. Operating voltages of 9V are compatible with the electrical part.
MAX4582CUE Features
4 Channels
Switch Circuit: SP4T
1μA Supply Current
MAX4582CUE Applications
There are a lot of Maxim Integrated MAX4582CUE Analog Switches & Multiplexers ICs applications.
- Private Branch Exchange (PBX)
- High speed data transmission line cards
- PBXs
- PBX interfaces
- Audio and video routing
- DSUs
- Mechanical reed relay replacement
- DVD-R
- Avionics test equipment
- Low-Voltage
