Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2012 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
80Ohm |
Terminal Finish |
Matte Tin (Sn) |
Max Power Dissipation |
457mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
MAX4582 |
Pin Count |
16 |
Operating Supply Voltage |
9V |
Power Supplies |
3/5/+-5V |
Number of Channels |
4 |
Number of Circuits |
2 |
Max Supply Voltage |
12V |
Min Supply Voltage |
2V |
Operating Supply Current |
1μA |
Propagation Delay |
200 ns |
Turn On Delay Time |
300 ns |
Logic Function |
Multiplexer |
Voltage - Supply, Single/Dual (±) |
2V~12V ±2V~6V |
Supply Type |
Dual, Single |
Supply Current-Max (Isup) |
0.01mA |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
200 ns |
Max Dual Supply Voltage |
6V |
On-State Resistance (Max) |
80Ohm |
Min Dual Supply Voltage |
2V |
Multiplexer/Demultiplexer Circuit |
4:1 |
Off-state Isolation-Nom |
73 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
4pF 10pF |
On-state Resistance Match-Nom |
1Ohm |
Switch Circuit |
SP4T |
Switch Time (Ton, Toff) (Max) |
200ns, 100ns |
Charge Injection |
0.5pC |
Channel-to-Channel Matching (ΔRon) |
1 Ω |
Crosstalk |
-96dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-off Time-Max |
100ns |
Height Seated (Max) |
1.1mm |
Length |
5mm |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
MAX4582EUE+ Overview
The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tube. Mounted in Surface Mount is this multiplexer. 4:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~85°C TA. Total terminations are 16. The electronic part provides high-quality output because it has 4 channels. When the electronic component is given a voltage of 5V, it should be turned on and run. As part of the design of the 16 series, this electronic part has been incorporated into the system. Based on SP4T switching circuits, these analog multiplexers work. The circuits in this analogue multiplexer number 2. Look for analog switch ic variants by searching with MAX4582. This digital multiplexer has 80Ohm internal resistance. Please refer to the datasheets for 16 pins functions. Users should never supply a voltage higher than 12V to a switch device. Digital switch that provides Dual, Single power at a cost-effective price. In order for the electronic part to function properly, the lowest voltage should be 2V. The analogue multiplexer could operate on 1μA current. Despite this switch device's dual supply capability, its voltage should not exceed 6V. It is recommended that you attach at least 2V to your dual power supply. A voltage of 9V can be used to operate the electronic component.
MAX4582EUE+ Features
4 Channels
Switch Circuit: SP4T
1μA Supply Current
MAX4582EUE+ Applications
There are a lot of Maxim Integrated MAX4582EUE+ Analog Switches & Multiplexers ICs applications.
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Industrial and process control systems
- DVD-R
- PBXs
- PBX interfaces
- Switching Systems
- Battery-powered systems
- Sample hold systems
- RGB switches
- USB 1.1 signal switching circuits