MAX4583CEE+
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4583 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 3 |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Supply Current-Max (Isup) | 0.01mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 80Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 73 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 4pF 6pF |
| On-state Resistance Match-Nom | 1Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 200ns, 100ns |
| Charge Injection | 0.5pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -73dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 200ns |
| Switch-off Time-Max | 100ns |
| Signal Current-Max | 0.02A |
| Length | 4.89mm |
| RoHS Status | ROHS3 Compliant |
MAX4583CEE+ Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SSOP (0.154, 3.90mm Width). The advanced packaging method Tube provides high reliability. A switch device like this is mounted in Surface Mount. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature around 0°C~70°C TA extended. 16 terminations have been made so far. The electronic part provides high-quality output because it has 1 channels. When a voltage supply of 5V is used, the electronic component should be turned on and run. As part of its design, the 16 series is equipped with this electronic component. Based on SPDT switching circuits, these analog multiplexers work. A 3 circuit is present in this switch device. Try searching with MAX4583 to find analog multiplexer variants. There is Multiplexer or Switches analog multiplexer like this in the world.
MAX4583CEE+ Features
1 Channels
Switch Circuit: SPDT
MAX4583CEE+ Applications
There are a lot of Maxim Integrated MAX4583CEE+ Analog Switches & Multiplexers ICs applications.
- Channelized and Unchannelized DS3 applications
- Ultrasound
- SDH
- Signal routing between systems
- DSUs
- Communication systems
- Audio and video switching
- Voice over IP/DSL – Integrated Access Devices, Smart
- Fiber to the Home
- DSLAMs
