MAX4583CUE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 80Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 696mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4583 |
| Pin Count | 16 |
| Operating Supply Voltage | 6V |
| Number of Channels | 1 |
| Number of Circuits | 3 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Max Supply Current | 1μA |
| Turn On Delay Time | 200 ns |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 100 ns |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 80Ohm |
| Min Dual Supply Voltage | 2V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 73 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 4pF 6pF |
| On-state Resistance Match-Nom | 1Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 200ns, 100ns |
| Charge Injection | 0.5pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -73dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.02A |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4583CUE+T Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 2:1. Around 0°C~70°C TA is the extended operating temperature. Totally, there are 16 terminations. By its 1 channels, the electronic component provides high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. The electronic part body is injected with 16 pins. A SPDT switching circuit is used for these analog switches. There are 3 circuits in this multiplexer. Search with MAX4583 if you are looking for analog multiplexer variants. An switch multiplexer with 80Ohm internal resistance has a value of 80Ohm. Datasheets for functions of 16 pins are available. It is a typical Multiplexer or Switches analog multiplexer. It is generally not recommended to supply a voltage higher than 12V to the switch device in normal circumstances. Digital switch that provides Dual, Single power at a cost-effective price. It is recommended to use 2V as the lowest voltage for the electrical part. An operating current of 1μA would be sufficient for this switch device. Put voltage above 1μA on the multiplexer to cause damage. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 6V. When using dual power supplies, you should attach at least 2V. 6V operating voltages can be used with this electrical part.
MAX4583CUE+T Features
1 Channels
Switch Circuit: SPDT
1μA Supply Current
MAX4583CUE+T Applications
There are a lot of Maxim Integrated MAX4583CUE+T Analog Switches & Multiplexers ICs applications.
- Data switching
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Cable Modem
- High-Voltage
- Cable PC
- Channelized and Unchannelized DS3 applications
- Imaging
- Frame Relay Equipment
- Optical Applications
- PDH Multiplexers
