MAX4583LEEE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX4583 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/12.6V |
| Number of Channels | 1 |
| Number of Circuits | 3 |
| Supply Current-Max (Isup) | 0.01mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 80Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 73 dB |
| Current - Leakage (IS(off)) (Max) | 2nA |
| Channel Capacitance (CS(off), CD(off)) | 4pF 6pF |
| On-state Resistance Match-Nom | 1Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 200ns, 100ns |
| Charge Injection | 0.5pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -96dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 200ns |
| Switch-off Time-Max | 200ns |
| Voltage - Supply, Single (V+) | 2V~12V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
MAX4583LEEE+T Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SSOP (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 2:1. Around -40°C~85°C TA is the extended operating temperature. In total, there have been 16 terminations. This electronic part offers high-quality output due to its 1 channels. It is safe to turn on and run the electronic component with a 5V voltage supply. It is injected into the electrical part body with 16 pins. Based on SPDT switching circuits, these analog multiplexers work. This multiplexer is composed of 3 circuits. Using the MAX4583 search parameter, you can discover variants of the switch. A analogue multiplexer of this type is a Multiplexer or Switches. Draining from a single voltage supply, this analog switch requires a voltage of 2V~12V.
MAX4583LEEE+T Features
1 Channels
Switch Circuit: SPDT
MAX4583LEEE+T Applications
There are a lot of Maxim Integrated MAX4583LEEE+T Analog Switches & Multiplexers ICs applications.
- Digital access cross connects
- Fiber In The Loop (FITL)
- Mechanical reed relay replacement
- Medical Instrumentation
- Access Concentrators
- Audio and video signal routing
- Intelligent PBX
- Multiplexers
- Precision data acquisition
- Cable PC
