Parameters |
Mounting Type |
Through Hole |
Package / Case |
16-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
16 |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Published |
2003 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
1.25Ohm |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
2 |
Time@Peak Reflow Temperature-Max (s) |
20 |
Base Part Number |
MAX4590 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Power Supplies |
5/30/+-5/+-15V |
Number of Channels |
1 |
Number of Circuits |
2 |
Max Supply Voltage |
36V |
Min Supply Voltage |
4.5V |
Voltage - Supply, Single/Dual (±) |
4.5V~36V ±4.5V~20V |
Max Dual Supply Voltage |
20V |
On-State Resistance (Max) |
1.25Ohm |
Min Dual Supply Voltage |
4.5V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Current - Leakage (IS(off)) (Max) |
500pA |
Channel Capacitance (CS(off), CD(off)) |
115pF 115pF |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
160ns, 210ns |
Charge Injection |
-60pC |
Channel-to-Channel Matching (ΔRon) |
50m Ω |
Crosstalk |
-65dB @ 1MHz |
Normal Position |
NO |
Length |
19.175mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
MAX4590CPE Overview
Packed in 16-DIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. In order to provide high reliability, an advanced packaging method Tube is used. Mounted in Through Hole is this multiplexer. There is 1:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around 0°C~70°C TA. Total terminations are 16. A 1 channel electronic part produces high-quality output. The electrical component body receives 16 pins. A SPST - NO switching circuit is used for these analog switches. A 2 circuit is present in this switch device. If you are looking for variants of the digital switch, trying search with MAX4590. A 1.25Ohm internal resistance characterizes this multiplexer. For details about the functions of 16 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. Users should never supply a voltage higher than 36V to a switch device. There should be 4.5V voltage fed to the electrical part below 4.5V. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 20V. You should attach at least 4.5V voltage if you are using dual power supply. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them.
MAX4590CPE Features
1 Channels
Switch Circuit: SPST - NO
MAX4590CPE Applications
There are a lot of Maxim Integrated MAX4590CPE Analog Switches & Multiplexers ICs applications.
- SONET
- Intelligent PBX
- Remote wireless modules
- E1 Multiplexer
- Imaging
- SDH/SONET multiplexers
- Audio and video routing
- 65 V DACs
- SONET/SDH ADM
- PDAs