MAX4591CPE
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Additional Feature | CAN ALSO OPERATES AT 15 V SUPPLY, OVERVOLTAGE PROTECTION |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | COMMERCIAL |
| Supply Voltage-Max (Vsup) | 16V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| On-State Resistance (Max) | 20Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 9pF |
| On-state Resistance Match-Nom | 0.5Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 80ns, 45ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 500m Ω |
| Crosstalk | -85dB @ 10MHz |
| Switch-on Time-Max | 90ns |
| Switch-off Time-Max | 50ns |
| Voltage - Supply, Single (V+) | 3V~16V |
| Length | 19.175mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
MAX4591CPE Overview
The electronic component is convenient to ship overseas because it is packed in a 16-DIP (0.300, 7.62mm). A high level of reliability can be achieved through the use of an advanced packaging method Tube. The multiplexer is located in Through Hole. Multiplexers and demultiplexers have the same number of circuits 1:1. An extended operating temperature of 0°C~70°C TA degrees Celsius. Total terminations are 16. A 1 channel electronic part produces high-quality output. In the case of a voltage supply of 12V volts, the electrical part can be powered up and run. The electronic part body is injected with 16 pins. These analog multiplexers are built based on SPST - NC switching circuits. There are 4 circuits in this switch device. An analogue multiplexer drains from a single voltage supply at 3V~16V. Don't miss this electronic component's additional features, such as: CAN ALSO OPERATES AT 15 V SUPPLY, OVERVOLTAGE PROTECTION.
MAX4591CPE Features
1 Channels
Switch Circuit: SPST - NC
Additional Features: CAN ALSO OPERATES AT 15 V SUPPLY, OVERVOLTAGE PROTECTION
MAX4591CPE Applications
There are a lot of Rochester Electronics, LLC MAX4591CPE Analog Switches & Multiplexers ICs applications.
- SONET
- Battery Powered Systems
- Private Branch Exchange (PBX)
- Medical
- PDAs
- PBX interfaces
- Cellular phones
- Medical Instrumentation
- ATM
- Optical Applications
