MAX4591CSE
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Additional Feature | CAN ALSO OPERATES AT 15 V SUPPLY, OVERVOLTAGE PROTECTION |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | COMMERCIAL |
| Supply Voltage-Max (Vsup) | 16V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| On-State Resistance (Max) | 20Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 9pF |
| On-state Resistance Match-Nom | 0.5Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 80ns, 45ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 500m Ω |
| Crosstalk | -85dB @ 10MHz |
| Switch-on Time-Max | 90ns |
| Switch-off Time-Max | 50ns |
| Voltage - Supply, Single (V+) | 3V~16V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
MAX4591CSE Overview
Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, you'll find this switch device. 1:1 is the ratio of multiplexer to demultiplexer circuits. Extended operating temperature around 0°C~70°C TA. Total terminations are 16. A electrical component with 1 channels is capable of high-quality output. It is safe to turn on and run the electronic component with a 12V voltage supply. An electrical component like this is included in the 16 series. Multiplexers built on a SPST - NC switching circuit are built. It consists of 4 circuits. Using only a single voltage supply, this analog switch requires 3V~16V voltage. Don’t miss additional features of the electronic component such as: CAN ALSO OPERATES AT 15 V SUPPLY, OVERVOLTAGE PROTECTION.
MAX4591CSE Features
1 Channels
Switch Circuit: SPST - NC
Additional Features: CAN ALSO OPERATES AT 15 V SUPPLY, OVERVOLTAGE PROTECTION
MAX4591CSE Applications
There are a lot of Rochester Electronics, LLC MAX4591CSE Analog Switches & Multiplexers ICs applications.
- Switching Systems
- Multi-Line E1 Interface Cards
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Communications systems
- Fault Tolerant Systems
- HDTV
- Automatic test equipment
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Private Branch Exchange (PBX)
- High speed data transmission line cards
