MAX4591ESE
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 20Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | CAN ALSO OPERATES AT 15 V SUPPLY, OVERVOLTAGE PROTECTION |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4591 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 16V |
| Power Supplies | 12/15V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| On-State Resistance (Max) | 20Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 9pF |
| On-state Resistance Match-Nom | 0.5Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 80ns, 45ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 500m Ω |
| Crosstalk | -85dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 90ns |
| Switch-off Time-Max | 50ns |
| Voltage - Supply, Single (V+) | 3V~16V |
| Normal Position | NC |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
MAX4591ESE Overview
The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tube. In Surface Mount, this analog switch is mounted. 1:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. The total number of terminations is 16. As a result of its 1 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 12V voltage supply. The electronic part body is injected with 16 pins. On the other hand, analog switches can be constructed using SPST - NC switching circuits. The multiplexer consists of 4 circuits. Try searching with MAX4591 to find analog multiplexer variants. The internal resistance of this digital multiplexer is 20Ohm. The analogue multiplexer in this example is a typical Multiplexer or Switches. A voltage of 3V~16V is required to drain this analog switch from a single voltage supply. This analog switch ic utilizes SEPARATE OUTPUT output. Don't miss this electronic component's additional features, such as: CAN ALSO OPERATES AT 15 V SUPPLY, OVERVOLTAGE PROTECTION.
MAX4591ESE Features
1 Channels
Switch Circuit: SPST - NC
Additional Features: CAN ALSO OPERATES AT 15 V SUPPLY, OVERVOLTAGE PROTECTION
MAX4591ESE Applications
There are a lot of Maxim Integrated MAX4591ESE Analog Switches & Multiplexers ICs applications.
- Video signal routing
- Precision instrumentation
- Audio and video routing
- Relay Replacement
- Audio and video switching
- Automotive applications
- Mechanical reed relay replacement
- Microwave transmission systems
- Cross Connects
- Existing multiplexer applications (both fault-protected and nonfault-protected)
