MAX4592CUE

80ns, 45ns SPST - NO 20Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4592 16 Pins 100pA 12V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4592CUE
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 864
Description: 80ns, 45ns SPST - NO 20Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4592 16 Pins 100pA 12V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Max Power Dissipation	457mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	4
Supply Voltage	12V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX4592
Output	SEPARATE OUTPUT
Pin Count	16
Power Supplies	12/15V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	16V
Min Supply Voltage	3V
Operating Supply Current	1μA
Nominal Supply Current	1nA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	80 ns
Supply Type	Single
Turn-Off Delay Time	45 ns
On-State Resistance (Max)	20Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	72 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	9pF 9pF
On-state Resistance Match-Nom	0.5Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	80ns, 45ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	500m Ω
Crosstalk	-85dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	90ns
Switch-off Time-Max	50ns
Voltage - Supply, Single (V+)	3V~16V
Normal Position	NO
Height Seated (Max)	1.1mm
Length	5mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	2000
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	20Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Additional Feature	CAN ALSO OPERATES AT 15 V SUPPLY, OVERVOLTAGE PROTECTION
Subcategory	Multiplexer or Switches

MAX4592CUE Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). High reliability is ensured by the advanced packaging method Tube. It is mounted in the position Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Temperatures around 0°C~70°C TA are extended for operation. There are 16 terminations totally. Due to its 1 channels, the electrical component produces high-quality output. When a voltage supply of 12V is used, the electronic component should be turned on and run. A total of 16 pins are injected into the electrical part body. These analog multiplexers are built based on SPST - NO switching circuits. There are 4 circuits in this multiplexer. Use MAX4592 to search for variants of the digital switches. It has an internal resistance of 20Ohm. Please refer to the datasheets for 16 pins functions. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 16V in normal situations. A analog switch ic that has a cost-effective Single supply type. The lowest voltage the electronic part should receive is 3V. 1μA current would be enough for this multiplexer to operate. A voltage of 3V~16V is required to drain this analog switch from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 1μA. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. This electronic part has additional features, such as: CAN ALSO OPERATES AT 15 V SUPPLY, OVERVOLTAGE PROTECTION.