MAX4592CUE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 20Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 457mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX4592 |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 1nA |
| Max Supply Current | 1μA |
| Turn On Delay Time | 80 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 45 ns |
| On-State Resistance (Max) | 20Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 9pF |
| On-state Resistance Match-Nom | 0.5Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 80ns, 45ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 500m Ω |
| Crosstalk | -85dB @ 10MHz |
| Voltage - Supply, Single (V+) | 3V~16V |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4592CUE+T Overview
Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. In Surface Mount, you'll find this switch device. Multiplexer and demultiplexer circuits have a number 1:1. Operation at a temperature around 0°C~70°C TA. There are 16 terminations totally. A high-quality output is provided by the electrical component's 1 channels. When the electronic component is given a voltage of 12V, it should be turned on and run. It is injected into the electrical part body with 16 pins. Unlike digital switches, these are based on SPST - NO switching circuits. A total of 4 circuits make up this switch device. Try searching with MAX4592 if you're looking for variants. The internal resistance of this digital multiplexer is 20Ohm. Please refer to the datasheets for 16 pins functions. An abnormal situation would be for the switch device to be supplied with a voltage greater than 16V. The digital multiplexer has a low cost Single supply. In order for the electronic part to function properly, the lowest voltage should be 3V. Using only a single voltage supply, this analog switch requires 3V~16V voltage. A digital multiplexer may suffer damage if voltage is applied above 1μA. Operating voltages range from 15V.
MAX4592CUE+T Features
1 Channels
Switch Circuit: SPST - NO
MAX4592CUE+T Applications
There are a lot of Maxim Integrated MAX4592CUE+T Analog Switches & Multiplexers ICs applications.
- Audio and video signal routing
- Medical Instrumentation
- New designs requiring multiplexer functions
- Precision test equipment
- Isolation
- Automatic test equipment
- Video signal routing
- Signal routing between systems
- Communications systems
- Communication systems
