MAX4592EUE+
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX4592 |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 1nA |
| Max Supply Current | 1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 80 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 45 ns |
| On-State Resistance (Max) | 20Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 9pF |
| On-state Resistance Match-Nom | 0.5Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 80ns, 45ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 500m Ω |
| Crosstalk | -85dB @ 10MHz |
| Voltage - Supply, Single (V+) | 3V~16V |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 20Ohm |
| Terminal Finish | MATTE TIN |
| Max Power Dissipation | 457mW |
MAX4592EUE+ Overview
As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. To ensure high reliability, a new packaging method Tube is used. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. The operating temperature is extended to around -40°C~85°C TA. Total terminations are 16. A electrical component with 1 channels is capable of high-quality output. Powered by a 12V voltage supply, the electrical part should be switched on and run. The electronic part body is injected with 16 pins. Multiplexers built on a SPST - NO switching circuit are built. Circuits number 4 make up this analogue multiplexer. Try searching with MAX4592 if you're looking for variants. The internal resistance of this digital multiplexer is 20Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 16V. The analog switch ic is of the Single supply type and is cost-effective. 3V should be the lowest voltage fed to the electronic component. The switch device would be able to operate with 1μA current. Analogue multiplexers require a 3V~16V voltage to drain from a single voltage supply. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. The electronic component can function from 15V.
MAX4592EUE+ Features
1 Channels
Switch Circuit: SPST - NO
1μA Supply Current
MAX4592EUE+ Applications
There are a lot of Maxim Integrated MAX4592EUE+ Analog Switches & Multiplexers ICs applications.
- Relay Replacement
- Precision data acquisition
- Public switching systems
- Central office
- Audio and video signal routing
- Audio and video switching
- Signal routing between systems
- Private Branch Exchange (PBX)
- Medical
- Battery-powered systems
