Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Published |
2000 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
20Ohm |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Additional Feature |
CAN ALSO OPERATES AT 15 V SUPPLY, OVERVOLTAGE PROTECTION |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
4 |
Supply Voltage |
12V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
20 |
Base Part Number |
MAX4593 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Power Supplies |
12/15V |
Number of Channels |
1 |
Number of Circuits |
4 |
Max Supply Voltage |
16V |
Min Supply Voltage |
3V |
Operating Supply Current |
1μA |
Throw Configuration |
SPST |
Supply Type |
Single |
On-State Resistance (Max) |
20Ohm |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
72 dB |
Current - Leakage (IS(off)) (Max) |
100pA |
Channel Capacitance (CS(off), CD(off)) |
9pF 9pF |
On-state Resistance Match-Nom |
0.5Ohm |
Switch Circuit |
SPST - NO/NC |
Switch Time (Ton, Toff) (Max) |
80ns, 45ns |
Charge Injection |
2pC |
Channel-to-Channel Matching (ΔRon) |
500m Ω |
Crosstalk |
-85dB @ 10MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
90ns |
Switch-off Time-Max |
50ns |
Voltage - Supply, Single (V+) |
3V~16V |
Height Seated (Max) |
1.1mm |
Length |
5mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
MAX4593CUE Overview
Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). This high-reliability packaging method uses advanced packaging methods Tube. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. The operating temperature is extended to around 0°C~70°C TA. In total, there are 16 terminations. A electrical component with 1 channels is capable of high-quality output. If the voltage supply is 12V volts, the electrical component should be turned on and run. There is an electrical component included in the 16 series. On the other hand, analog switches can be constructed using SPST - NO/NC switching circuits. There are 4 circuits in this multiplexer. Try searching for MAX4593 variants of the analog switch ic. In this multiplexer, the internal resistance is 20Ohm. For details about the functions of 16 pins, please refer to the datasheets. Multiplexer or Switches is a typical switch device. A voltage higher than 16V should not normally be supplied to the switches. Analogue multiplexers of the Single supply type that are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 3V. This digital switch can be operated with a current of 1μA. Using a single voltage supply, this switch device consumes 3V~16V volts. There are SEPARATE OUTPUT outputs on this analog switch ic. Don’t miss additional features of the electronic component such as: CAN ALSO OPERATES AT 15 V SUPPLY, OVERVOLTAGE PROTECTION.
MAX4593CUE Features
1 Channels
Switch Circuit: SPST - NO/NC
1μA Supply Current
Additional Features: CAN ALSO OPERATES AT 15 V SUPPLY, OVERVOLTAGE PROTECTION
MAX4593CUE Applications
There are a lot of Maxim Integrated MAX4593CUE Analog Switches & Multiplexers ICs applications.
- Precision test equipment
- Power routing
- SDH
- Avionics and Military Systems
- ISDN NT1/TA
- Routers
- Automatic test equipment
- Industrial and process control systems
- Battery Powered Instruments
- Medical Instrumentation