MAX4593EUE

80ns, 45ns SPST - NO/NC 20Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4593 16 Pins 100pA 12V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4593EUE
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 278
Description: 80ns, 45ns SPST - NO/NC 20Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4593 16 Pins 100pA 12V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2000
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	20Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Additional Feature	CAN ALSO OPERATES AT 15 V SUPPLY, OVERVOLTAGE PROTECTION
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	4
Supply Voltage	12V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX4593
Output	SEPARATE OUTPUT
Pin Count	16
Power Supplies	12/15V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	16V
Min Supply Voltage	3V
Operating Supply Current	1μA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	80 ns
Supply Type	Single
Turn-Off Delay Time	45 ns
On-State Resistance (Max)	20Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	72 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	9pF 9pF
On-state Resistance Match-Nom	0.5Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	80ns, 45ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	500m Ω
Crosstalk	-85dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	90ns
Switch-off Time-Max	50ns
Voltage - Supply, Single (V+)	3V~16V
Height Seated (Max)	1.1mm
Length	5mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant

MAX4593EUE Overview

This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. The advanced packaging method Tube provides high reliability. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a number of circuits 1:1. Around -40°C~85°C TA is the extended operating temperature. In total, 16 terminations have occurred. Due to its 1 channels, the electrical component produces high-quality output. With a 12V voltage supply, the electrical component should be turned on and run. The electronic part body is injected with 16 pins. A SPST - NO/NC switching circuit is used for these analog switches. A total of 4 circuits make up this switch device. Using the MAX4593 search parameter, you can discover variants of the switch. Analog switches have 20Ohm internal resistance. To find out what the functions of 16 pins are, please refer to their datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Multiplexers should not be powered above 16V in normal situations. Analogue multiplexer with a Single supply type that is cost-effective. There should be 3V voltage fed to the electrical part below 3V. For this multiplexer to operate, 1μA current would be sufficient. A voltage of 3V~16V is required to drain this analog switch from a single voltage supply. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. There is also CAN ALSO OPERATES AT 15 V SUPPLY, OVERVOLTAGE PROTECTION to look out for in this electronic part.