MAX4599EXT-T
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4599 |
| Pin Count | 6 |
| JESD-30 Code | R-PDSO-G6 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Number of Bits | 4 |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 60Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 76 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 8pF |
| On-state Resistance Match-Nom | 1Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 30ns, 25ns |
| Charge Injection | 3pC |
| Channel-to-Channel Matching (ΔRon) | 200m Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 35ns |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Length | 2mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX4599EXT-T Overview
Shipping overseas is convenient with the electronic component packed in 6-TSSOP, SC-88, SOT-363. High reliability is achieved by using advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. Extended operating temperature around -40°C~85°C TA. 6 terminations have been made so far. Due to its 1 channels, the electrical component produces high-quality output. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. As part of its design, the 6 series is equipped with this electronic component. On the other hand, analog switches can be constructed using SPDT switching circuits. It consists of 1 circuits. Try searching for the analog switch ic with MAX4599 if you are looking for variants. There is Multiplexer or Switches analog multiplexer like this in the world. This analog switch requires a voltage of 2V~5.5V to drain from a single voltage supply. 4-bits are supported.
MAX4599EXT-T Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 200MHz
4-Bit
MAX4599EXT-T Applications
There are a lot of Maxim Integrated MAX4599EXT-T Analog Switches & Multiplexers ICs applications.
- Cell phones
- Automotive applications
- Video switching
- DVD-R
- Precision instrumentation
- Medical systems
- New designs requiring multiplexer functions
- E1 Multiplexer
- Precision test equipment
- Transmit
