MAX4600CAE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4600 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5/30/+-5/+-15V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 1.25Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 53 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 115pF 115pF |
| On-state Resistance Match-Nom | 0.25Ohm |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 160ns, 210ns |
| Charge Injection | -60pC |
| Channel-to-Channel Matching (ΔRon) | 50m Ω |
| Crosstalk | -65dB @ 1MHz |
| Switch-on Time-Max | 160ns |
| Height Seated (Max) | 1.99mm |
| RoHS Status | ROHS3 Compliant |
MAX4600CAE+T Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SSOP (0.209, 5.30mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. Operation at a temperature around 0°C~70°C TA. In total, 16 terminations have occurred. As a result of its 1 channels, this electronic component provides high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. An electrical component like this is included in the 16 series. Multiplexers built on a SPST - NO/NC switching circuit are built. Circuits number 2 make up this analogue multiplexer. Try searching for MAX4600 variants of the analog switch ic. In this analog multiplexer, the value is Multiplexer or Switches. This analog switch ic utilizes SEPARATE OUTPUT output.
MAX4600CAE+T Features
1 Channels
Switch Circuit: SPST - NO/NC
MAX4600CAE+T Applications
There are a lot of Maxim Integrated MAX4600CAE+T Analog Switches & Multiplexers ICs applications.
- SONET/SDH ADM
- DSLAMs
- Avionics and Military Systems
- Power routing
- Ultrasound
- Channelized and Unchannelized DS3 applications
- Automotive applications
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Cable Modem
- Cross Connects
