MAX4600EAE
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 1.25Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 571mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX4600 |
| Pin Count | 16 |
| Polarity | Non-Inverting |
| Power Supplies | 5/30/+-5/+-15V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 4.5V |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 1.25Ohm |
| Min Dual Supply Voltage | 4.5V |
| High Level Output Current | 200mA |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 53 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 115pF 115pF |
| On-state Resistance Match-Nom | 0.05Ohm |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 160ns, 210ns |
| Charge Injection | -60pC |
| Channel-to-Channel Matching (ΔRon) | 50m Ω |
| Crosstalk | -65dB @ 1MHz |
| Height Seated (Max) | 1.99mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
MAX4600EAE Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SSOP (0.209, 5.30mm Width). Advanced packaging method Tube is used to provide high reliability. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a number of circuits 1:1. Temperatures around -40°C~85°C TA are extended for operation. A total of 16 terminations have been recorded. A high-quality output is provided by the electrical component's 1 channels. A 15V voltage supply should turn on and run the electronic component. Electronic part bodies are injected with 16 pins. Multiplexers built on a SPST - NO/NC switching circuit are built. Circuits number 2 make up this analogue multiplexer. Look for analog switch ic variants by searching with MAX4600. In this multiplexer, the internal resistance is 1.25Ohm. To find out what the 16 pins do, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. A voltage higher than 36V should not normally be supplied to the switches. It is recommended that the electrical component receives a voltage of 4.5V. For this multiplexer, dual supply voltage is feasible, but it should not exceed 20V. If you are using a dual power supply, you should attach at least 4.5V.
MAX4600EAE Features
1 Channels
Switch Circuit: SPST - NO/NC
MAX4600EAE Applications
There are a lot of Maxim Integrated MAX4600EAE Analog Switches & Multiplexers ICs applications.
- Sample hold systems
- Optical Applications
- Avionics test equipment
- Power routing
- SDH
- PDH Multiplexers
- Ultrasound
- High-Voltage
- Frame Relay Equipment
- Automotive applications
