MAX4602CPE
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | COMMERCIAL |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 2.5Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 56 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 55pF 55pF |
| On-state Resistance Match-Nom | 0.1Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 250ns, 350ns |
| Charge Injection | 120pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -59dB @ 1MHz |
| Switch-on Time-Max | 250ns |
| Switch-off Time-Max | 350ns |
| Length | 19.175mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
MAX4602CPE Overview
Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. Advanced packaging method Tube is used to provide high reliability. A switch device like this is mounted in Through Hole. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Temperatures around 0°C~70°C TA are extended for operation. In total, 16 terminations have occurred. As a result of its 1 channels, this electronic component provides high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. It is part of the design of the 16 series that this electronic component is included. Multiplexers built on a SPST - NO switching circuit are built. There are 4 circuits in this multiplexer.
MAX4602CPE Features
1 Channels
Switch Circuit: SPST - NO
MAX4602CPE Applications
There are a lot of Rochester Electronics, LLC MAX4602CPE Analog Switches & Multiplexers ICs applications.
- Audio and video routing
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Video signal routing
- Mechanical reed relay replacement
- Fiber In The Loop (FITL)
- Precision test equipment
- Channel Banks
- Public switching systems
- Wireless Local Loop
- RGB switches
