MAX4604CPE
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | COMMERCIAL |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 4Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 34pF 34pF |
| On-state Resistance Match-Nom | 0.2Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 120ns, 130ns |
| Charge Injection | 225pC |
| Channel-to-Channel Matching (ΔRon) | 200m Ω |
| Crosstalk | -60dB @ 1MHz |
| Length | 19.175mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
MAX4604CPE Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-DIP (0.300, 7.62mm). Advanced packaging method Tube is used to provide high reliability. There is an analog multiplexer mounted in position Through Hole. Multiplexers and demultiplexers have a number of circuits 1:1. An extended operating temperature of 0°C~70°C TA degrees Celsius. A total of 16 terminations have been recorded. By its 1 channels, the electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. It is injected into the electrical part body with 16 pins. The analog switch ics are built using SPST - NC switching circuits. There are 4 circuits in this multiplexer.
MAX4604CPE Features
1 Channels
Switch Circuit: SPST - NC
MAX4604CPE Applications
There are a lot of Rochester Electronics, LLC MAX4604CPE Analog Switches & Multiplexers ICs applications.
- Cable PC
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Routers
- Precision data acquisition
- Audio and video switching
- ISDN NT1/TA
- Fiber to the Home
- Battery Powered Instruments
- Cellular phones
- Mechanical reed relay replacement
