Parameters |
Crosstalk |
-60dB @ 1MHz |
Switch-on Time-Max |
220ns |
Normal Position |
NC |
Height Seated (Max) |
1.75mm |
Length |
9.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Published |
1999 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
4Ohm |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
696mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
4 |
Supply Voltage |
15V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
20 |
Base Part Number |
MAX4604 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Power Supplies |
5/30/+-5/+-15V |
Number of Channels |
1 |
Number of Circuits |
4 |
Max Supply Voltage |
20V |
Min Supply Voltage |
4.5V |
Nominal Supply Current |
1nA |
Max Supply Current |
500nA |
Throw Configuration |
SPST |
Turn On Delay Time |
120 ns |
Voltage - Supply, Single/Dual (±) |
4.5V~36V ±4.5V~20V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
130 ns |
Max Dual Supply Voltage |
20V |
On-State Resistance (Max) |
4Ohm |
Min Dual Supply Voltage |
4.5V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
62 dB |
Current - Leakage (IS(off)) (Max) |
500pA |
Channel Capacitance (CS(off), CD(off)) |
34pF 34pF |
On-state Resistance Match-Nom |
0.2Ohm |
Switch Circuit |
SPST - NC |
Switch Time (Ton, Toff) (Max) |
120ns, 130ns |
Charge Injection |
225pC |
Channel-to-Channel Matching (ΔRon) |
200m Ω |
MAX4604CSE Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have the same number of circuits 1:1. Operating temperature extended to 0°C~70°C TA. 16 terminations have been made so far. As a result of its 1 channels, this electronic component provides high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. It is part of the design of the 16 series that this electronic component is included. A SPST - NC switching circuit is used to build these analog multiplexers. 4 circuits are used in this analogue multiplexer. MAX4604 can be used to search for analog multiplexer variants. The internal resistance of this digital multiplexer is 4Ohm. Please refer to the datasheets for 16 pins functions. There is Multiplexer or Switches analog multiplexer like this in the world. It is normally recommended that users do not supply the multiplexer with voltages higher than 20V. A cost-effective Dual, Single supply type analogue multiplexer. It is recommended that the electrical component receives a voltage of 4.5V. The switch multiplexer may be damaged if it is exposed to voltage greater than 500nA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 20V. If you are using a dual power supply, you should attach at least 4.5V. The analog switch ic utilizes SEPARATE OUTPUT outputs in total.
MAX4604CSE Features
1 Channels
Switch Circuit: SPST - NC
MAX4604CSE Applications
There are a lot of Maxim Integrated MAX4604CSE Analog Switches & Multiplexers ICs applications.
- MP3 players
- Cable PC
- Fiber to the Home
- DVD-R
- Audio and video routing
- Avionics test equipment
- Central office
- Remote Powered Equipment
- Battery Powered Systems
- Residential Gateways, Home Gateway/Router