Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
1999 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
4Ohm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
696mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
15V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
MAX4604 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Power Supplies |
5/30/+-5/+-15V |
Number of Channels |
4 |
Max Supply Voltage |
20V |
Min Supply Voltage |
4.5V |
Nominal Supply Current |
1nA |
Max Supply Current |
500nA |
Throw Configuration |
SPST |
Turn On Delay Time |
120 ns |
Voltage - Supply, Single/Dual (±) |
4.5V~36V ±4.5V~20V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
130 ns |
Max Dual Supply Voltage |
20V |
On-State Resistance (Max) |
4Ohm |
Min Dual Supply Voltage |
4.5V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
62 dB |
Current - Leakage (IS(off)) (Max) |
500pA |
Channel Capacitance (CS(off), CD(off)) |
34pF 34pF |
On-state Resistance Match-Nom |
0.2Ohm |
Switch Circuit |
SPST - NC |
Switch Time (Ton, Toff) (Max) |
120ns, 130ns |
Charge Injection |
225pC |
Channel-to-Channel Matching (ΔRon) |
200m Ω |
Crosstalk |
-60dB @ 1MHz |
Switch-on Time-Max |
220ns |
Normal Position |
NC |
Height Seated (Max) |
1.75mm |
Length |
9.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
MAX4604ESE+ Overview
The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tube. In Surface Mount, you'll find this switch device. 1:1 is the ratio of multiplexer to demultiplexer circuits. Operation at a temperature around -40°C~85°C TA. There are 16 terminations totally. As a result of its 4 channels, this electronic component provides high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. An injection of 16 pins is performed into the body of the electrical component. These analog multiplexers are built based on SPST - NC switching circuits. If you are looking for variants of the digital switch, trying search with MAX4604. Analog switches have 4Ohm internal resistance. The datasheets for the 16 pins explain the functions. There is a standard Multiplexer or Switches analogue multiplexer here. Users should never supply a voltage higher than 20V to a switch device. A cost-effective Dual, Single supply type analogue multiplexer. It is recommended that the electrical component receives a voltage of 4.5V. Putting voltage greater than 500nA on the multiplexer may cause damage. If put voltage greater than 20V on the multiplexer, damage may be caused to the device. You should attach at least 4.5V voltage if you are using dual power supply. The analog switch ic utilizes SEPARATE OUTPUT outputs in total.
MAX4604ESE+ Features
4 Channels
Switch Circuit: SPST - NC
MAX4604ESE+ Applications
There are a lot of Maxim Integrated MAX4604ESE+ Analog Switches & Multiplexers ICs applications.
- Power routing
- Avionics test equipment
- Microprocessor controlled systems
- Private Branch Exchange (PBX)
- Medical Instrumentation
- Residential Gateways, Home Gateway/Router
- E1 Network Equipment
- PBX interfaces
- Multi-Line E1 Interface Cards
- Remote Powered Equipment