MAX4609ESE+

110ns, 150ns SPST - NO/NC 2.5Ohm DUAL Analog Switches MAX4609 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4609ESE+
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 646
Description: 110ns, 150ns SPST - NO/NC 2.5Ohm DUAL Analog Switches MAX4609 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2012
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	2.5Ohm
Terminal Finish	TIN
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	15V
Base Part Number	MAX4609
Output	SEPARATE OUTPUT
Pin Count	16
Power Supplies	5/30/+-5/+-15V
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	36V
Min Supply Voltage	4.5V
Voltage - Supply, Single/Dual (±)	4.5V~36V ±4.5V~20V
Neg Supply Voltage-Nom (Vsup)	-15V
Max Dual Supply Voltage	20V
On-State Resistance (Max)	2.5Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	64pF 64pF
On-state Resistance Match-Nom	0.05Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	110ns, 150ns
Charge Injection	45pC
Channel-to-Channel Matching (ΔRon)	50m Ω
Crosstalk	-66dB @ 1MHz
Height Seated (Max)	1.75mm
Length	9.9mm
Width	3.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

MAX4609ESE+ Overview

Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. High reliability is ensured by the advanced packaging method Tube. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a number of circuits 1:1. Increasing operating temperature to around -40°C~85°C TA. 16 terminations have been made so far. Due to its 1 channels, the electrical component produces high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. A total of 16 pins are injected into the body of the electronic part. Multiplexers built on a SPST - NO/NC switching circuit are built. Circuits number 2 make up this analogue multiplexer. MAX4609 can be used to search for analog multiplexer variants. A 2.5Ohm internal resistance characterizes this multiplexer. For functions related to 16 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. A voltage higher than 36V should not normally be supplied to the switches. The lowest voltage the electronic part should receive is 4.5V. There is no problem with using dual supply voltage, but it should not exceed 20V. If you are using dual power supplies, you should attach at least 4.5V. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them.